Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
- 3. Engines
   + 3.1.2. Compression check
   + 3.2. 6-cylinder двухрядные engines V6 of 3,0 l
   + 3.3. A partition of engines
   - 3.4. An engine electric equipment
      3.4.2. Technical characteristics
      3.4.3. The storage battery
      3.4.4. Power cables
      3.4.5. Ignition system
      3.4.6. The coil () ignitions
      3.4.7. Check of the moment of ignition
      3.4.8. The block of electronic ignition
      3.4.9. System of a charge of the battery
      3.4.10. The generator
      3.4.11. A pressure and brush regulator
      3.4.12. System of start-up of the engine
      3.4.13. The starter electric motor
      3.4.14. The traction relay
      3.4.15. The basic malfunctions of an electric equipment
      3.4.16. That it is necessary to know to the owner of the car with инжекторным the engine
      3.4.17. A turbo the doctor
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

3.4.6. The coil () ignitions
THE GENERAL DATA

On engines V6 translate the ignition key in position Off, disconnect sockets from coils and check up resistance of primary chains of coils.

The prevention

On 4-cylinder engines this procedure is not provided.


Check up resistance of secondary chains of coils. For this purpose translate the ignition key in position Off, designate and disconnect from coils high-voltage wires (the 4-cylinder engine).


On engines V6 it is necessary to remove the coil. If resistance differ from standard the ignition coil replace.

Replacement

PERFORMANCE ORDER
1. Disconnect the battery from weight.

4-CYLINDER ENGINES

PERFORMANCE ORDER
2. Remove a throttle branch pipe (subsection 6.14 see.).
3. Designate and disconnect from the coil a socket and high-voltage wires.
4. Turn away bolts (arrows) and remove the coil with an arm.
5. Turn away bolts and remove the coil from an arm.
6. Installation is carried out upside-down.

6-CYLINDER ENGINES

PERFORMANCE ORDER
2. Designate and disconnect from the coil a socket and high-voltage wires.
3. Turn away bolts and remove the coil from an arm.
4. Installation is carried out upside-down.