Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
- 9. A running gear
   + 9.1.2. Technical characteristics
   + 9.2. A steering
   + 9.3. Semiaxes
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment
75acfaa4


9. A running gear

9.1. Suspension brackets

9.1.1. Introduction
THE GENERAL DATA

Knots of a forward suspension bracket and steering

1. The steering mechanism
2. The suspension bracket lever
3. Fastening of a spherical support
4. A rack and a spring
5. Draught of the stabilizer

Knots of a back suspension bracket

1. A stabilizer bar
2. The suspension bracket lever (N1)
3. A rod of a rack of a suspension bracket
4. An arm of a back suspension bracket
5. A suspension bracket rack
6. A collar of the plug of a bar of the stabilizer
7. The suspension bracket lever (N2)

Forward suspension bracket of type MacPherson. The top part of a rack fastens to a body through special cups ("caps"). The bottom part of a rack fastens to the top part of a rotary fist. The fist fastens to the spherical support mounted on the lever of a suspension bracket.

The back suspension bracket also is equipped by racks. The top part of a rack fastens to a body through caps. The bottom part of a rack fastens to an arm of a back axis. The suspension bracket arm шарнирно is connected to pair levers on each party and with a longitudinal bar.

The steering реечное, consists from gear рейки and sectors. The steering mechanism is mounted behind the power unit. The effort to a rotary fist is transferred through the steering draughts connected to the steering mechanism.

At suspension bracket repair it is necessary to moisten preliminary all fastenings subject to influence of a dirt and water, a getting liquid. Heating application at отворачивании carving connections extremely is not recommended for reasons пожаробезопасности.

Bolts and nuts which turned away with considerable efforts, replace.


The prevention

Suspension bracket details are forbidden to be prepared with heating application. At replacement establish only the details of the suspension bracket corresponding to the catalogue for given model of the car.