Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
- 2. Maintenance service
   2.2. The schedule of servicing Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tyres and pressure in tyres
   2.6. Check of level of a liquid of system of hydrostrengthening of a steering
   2.7. Check of level of liquid automatic gearbox
   2.8. Replacement of engine oil and the oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and accumulator gymnastics
   2.11. Check, adjustment of a tension and replacement drive a belt
   2.12. Check and replacement of hoses in an impellent compartment
   2.13. Check of system of cooling
   + 2.14. Shift of wheels
   2.15. Check of brake system
   2.16. Replacement of the air filter
   2.17. Power supply system check
   2.18. Check of level of a liquid of differential (automatic gearbox)
   2.19. Check of level of oil manual transmission
   2.20. Steering and suspension bracket check
   2.21. Check of covers of semiaxes
   2.22. Check of final system
   2.23. Height and a free wheeling of pedals of coupling and a brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of a cooling liquid and washing of system of cooling
   2.26. Check of the system, supervising allocation of steams of fuel
   2.27. Replacement of liquid automatic gearbox
   2.28. Replacement of oil manual transmission
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of backlashes of valves
   2.33. Replacement of a lining of a cover of a jellied mouth of a fuel tank
   2.34. Check and replacement of the valve of ventilation картера
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

2. Maintenance service

2.1. Technical characteristics
THE GENERAL DATA

Recommended lubricants and liquids
Engine oil API marks SJ or ILSAC GF-2
Viscosity Fig. the Scheme of viscosity of engine oil see
Fuel Neetilirovannyj gasoline with OCTANESым number 87 or above
Cooling liquid 50 or 70 % antifreeze on a basis этиленгликоля and water
Liquid of an automatic transmission DEXTRON III
Liquid of differential of an automatic transmission DEXTRON III
Oil of a mechanical transmission Transmissionnoe oil API GL-4 or GL-5 75W-90
Type of a brake liquid DOT3
Type of a liquid of a hydraulic drive of coupling DOT3
Liquid of system of hydrostrengthening of a steering DEXTRON II or III
Quantities
Engine oil, with filter replacement:
  – The four-cylinder engine 3,8
  – The six-cylinder engine 5,0
Cooling liquid:
  – Models with the four-cylinder engine 7,3
  – Models with the six-cylinder engine 9,6
Automatic transmission:
  – Models with the four-cylinder engine:
     • слитие and pouring 2,6
     • differential 1,7
  – Models with the six-cylinder engine:
     • слитие and pouring 5,0
     • differential 1,7
Mechanical transmission:
  – Models with the four-cylinder engine 2,3
  – Models with the six-cylinder engine 4,4
Ignition system
Spark plugs:
  – Type NGK BKR6EKPB-11
  – A spark backlash 1,092 mm
Resistance of wires of a high voltage Less than 25000 Ohm
Sequence of work of cylinders:
  – The four-cylinder engine 1 – 3 – 4 – 2
  – The six-cylinder engine 1 – 2 – 3 – 4 – 5 – 6
Backlashes of valves (the engine cold):
  – The four-cylinder engine:
     • inlet valves 0,176 – 0,279 mm
     • final valves 0,279 – 0,381 mm
  – The six-cylinder engine:
     • inlet valves 0,153 – 0,254 mm
     • final valves 0,254 – 0,356 mm
Cooling system
The thermostat:
  – The thermostat starts to open 80 – 185 ° WITH
  – The thermostat is completely open 95 ° WITH
Tension drivers belts (it is measured by means of measuring instruments Durroughs or Nippondenso) Lbs (pounds)

The four-cylinder engine
The generator (model with the air conditioner):
  – A new belt 140 – 190
  – An old belt 100 – 120
The generator (model without the air conditioner):
  – A new belt 100 – 150
  – An old belt 75 – 115
The pump of system of hydrostrengthening of a steering:
  – A new belt 95 – 145
  – An old belt 60 – 100
The six-cylinder engine
The generator:
  – A new belt 170 – 180
  – An old belt 95 – 135
The pump of system of hydrostrengthening of a steering:
  – A new belt 150 – 185
  – An old belt 95 – 135
Coupling:
  – A free wheeling of a pedal of coupling 5,5 – 15,8 mm
Pedal height:
  – The four-cylinder engine 155,5 – 168,2 mm
  – The six-cylinder engine 161,9 – 171,5 mm
Free wheeling of a pusher of a pedal
1,191 – 5,159 mm
Brake system
Is minimum admissible thickness of a frictional material of brake overlays
1,5 mm
Is minimum admissible thickness of a frictional material brake колодок 1,5 mm
Brake pedal:
  – A free wheeling 0,793 – 6,350 mm
  – Pedal height 152,4 – 161,9 mm
 – A stock of a course of a pedal 69,85 mm
Backlash of the switch of brake fires 0,794 – 2,381 mm
Adjustment of a manual brake 8 clicks
Suspension bracket and steering
Steering wheel free wheeling 30 mm
Admissible free wheeling spherical шарнирного connections 0 mm

The inhaling moments, Н.м.

Automatic transmission:
 – Pallet bolts 5
 – Bolts of the mesh filter 11
 – Drain заглушка 49
 – заглушки drain and jellied apertures of a mechanical transmission 49
Fixing nuts of wheels 103
Body:
 – Assembly bolts of forward sitting 43
Cross-beam of a forward suspension bracket:
 – A bolt And 182
 – A bolt In 33
 – A bolt With 37
Back suspension bracket:
 – Cross-beam bolts 52
 – Nuts of a lock plate 37
Spark plugs 18

The scheme of viscosity of engine oil


Numbering of cylinders and sequence of work of cylinders (the 4-cylinder engine)


Numbering of cylinders and sequence of work of cylinders (the 6-cylinder engine)