Toyota Camry

1996-2001 of release

Repair and car operation

3.1.1. Technical characteristics

THE GENERAL DATA

Kind of an impellent compartment of models with the 4-cylinder engine

1. A tank of a liquid of system of hydrostrengthening of a steering 2. A cover маслоналивной mouths The engine 3. Wires of spark plugs 4. The ignition coil 5. A tank of a brake liquid 6. A casing of the air filter 7. The accumulator 8. Щуп for measurement of level of a liquid of an automatic transmission

9. Щуп for measurement of level of oil of the engine 10. The oil filter 11. A cover of a bulk mouth of a radiator 12. A radiator hose 13. A liquid tank windscreen 14. A broad tank 15. The block of the relay and fuses

Marks	5S-FE
Volume	2,2 litres
Numbering of cylinders (from газораспределительного a belt to a transmission)	1 – 2 – 3 – 4
Sequence of work of cylinders	1 – 3 – 4 – 2
Head of cylinders
As much as possible admissible deformation:
– The surface of a head joined to the block of cylinders	0,508
– Inlet and final collectors	0,300
Gazoraspredelitelnyj belt
Length of a spring of an intermediate pulley a free condition	46,000
Camshaft
Diameters of necks of bearings	26,960 – 26,975
– A lubricant backlash of the bearing:
• the standard	0,026 – 0,061
• the limiting	0,100
• admissible deterioration	0,041
Cam height
– A camshaft of inlet valves:
• the standard	42,010 – 42,110
• the limiting	41,900
– A camshaft of final valves:
• the standard	40,061 – 40,160
• the limiting	39,949
Axial backlash
– A camshaft of inlet valves:
• the standard	0,046 – 0,099
• the limiting	0,119
– A camshaft of final valves:
• the standard	0,031 – 0,084
• the limiting	0,099
Trailer backlash of a spring of a gear wheel of a camshaft	22,505 – 22,911
District backlash of camshafts
The standard	0,020 – 0,201
The limiting	0,478
The lift of valves
Diameter of the lift	30,965 – 30,975
Diameter of a nest	31,001 – 31,018
Lubricant backlash
The standard	0,023 – 0,051
The limiting	0,071
The oil pump
– A backlash between a conducted gear wheel and a pump casing:
• the standard	0,094 – 0,160
• the limiting	0,201
– A backlash between a teeth of gear wheels:
• the standard	0,041 – 0,160
• the limiting	0,201

The moments of an inhaling of carving connections

Bolts and nuts of an inlet collector	19
Bolts of a clamp of an inlet collector	39
Bolts and nuts of a final collector	49
Bolts of the balancing device of the engine	49
Bolt of a pulley of a cranked shaft	109
Bolts of a flywheel or leading disk
Flywheel bolts (mechanical transmission)	88
Bolts of a leading disk (automatic transmission)	83
Bolts of an intermediate pulley	42
Bolts of a head of cylinders
Step 1	49
Step 2	Tighten on 90 degrees (a turn quarter)
Bolts of a cover of the radical bearing	19
Bolt of an asterisk of a cranked shaft	54
Bolts of the oil pump	9
Nut of an asterisk of the oil pump	25
Bolts and nuts маслозаборного a branch pipe	6
Bolts of the oil pallet	6
Nuts of tubes of spark plugs	45
Bolts of a clamp of a back epiploon of a cranked shaft	12
Engine fastenings
The top bolt of a forward support	64
Bolts, fastening an arm of a forward support to the engine	64
Bolts, fastening a forward support to a body
Silver colour	44
Green colour	65
The top bolt of a back support	64
Bolts, fastening an arm of a back support to the engine	64
Nuts, fastening a back support to a body	65
Bolts of the right draught regulating displacement of the engine	64
Bolts, fastening an arm of the right support to the engine	52