Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
- 3. Engines
   + 3.1.2. Compression check
   + 3.2. 6-cylinder двухрядные engines V6 of 3,0 l
   + 3.3. A partition of engines
   - 3.4. An engine electric equipment
      3.4.2. Technical characteristics
      3.4.3. The storage battery
      3.4.4. Power cables
      3.4.5. Ignition system
      3.4.6. The coil () ignitions
      3.4.7. Check of the moment of ignition
      3.4.8. The block of electronic ignition
      3.4.9. System of a charge of the battery
      3.4.10. The generator
      3.4.11. A pressure and brush regulator
      3.4.12. System of start-up of the engine
      3.4.13. The starter electric motor
      3.4.14. The traction relay
      3.4.15. The basic malfunctions of an electric equipment
      3.4.16. That it is necessary to know to the owner of the car with инжекторным the engine
      3.4.17. A turbo the doctor
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

3.4.11. A pressure and brush regulator

Replacement

PERFORMANCE ORDER
1. Remove the generator.
2. Turn away a nut of a back cover, a nut of a conclusion of the generator.
3. Cнимите изоляционную the plug of a conclusion of the generator.
4. Remove a back cover of the generator.
5. Turn away screws and remove щеткодержатель and a pressure regulator.
6. Measure length of an acting part of brushes. If length of a brush less maximum permissible щеткодержатель in gathering with brushes replace.
7. Be convinced that brushes freely move in щеткодержателе.
8. Establish a pressure regulator
9. Establish щеткодержатель for what wring out brushes.
10. Insert screws щеткодержателя into a back cover.
11. Establish a cover and tighten nuts, establish the plug and tighten a nut.
12. Establish the generator.