Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
- 3. Engines
   + 3.1.2. Compression check
   + 3.2. 6-cylinder двухрядные engines V6 of 3,0 l
   + 3.3. A partition of engines
   - 3.4. An engine electric equipment
      3.4.2. Technical characteristics
      3.4.3. The storage battery
      3.4.4. Power cables
      3.4.5. Ignition system
      3.4.6. The coil () ignitions
      3.4.7. Check of the moment of ignition
      3.4.8. The block of electronic ignition
      3.4.9. System of a charge of the battery
      3.4.10. The generator
      3.4.11. A pressure and brush regulator
      3.4.12. System of start-up of the engine
      3.4.13. The starter electric motor
      3.4.14. The traction relay
      3.4.15. The basic malfunctions of an electric equipment
      3.4.16. That it is necessary to know to the owner of the car with инжекторным the engine
      3.4.17. A turbo the doctor
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


3.4.3. The storage battery

Engine start-up in emergency situations

Subsection 1.2.6 see.


1. Disconnect from the battery both cable, having begun with a negative pole.
2. Check up the colour indicator. If the indicator of black colour charge the battery. Check up pressure which should be 11,5–12,0 In (preliminary, before battery switching-off, it is recommended it is necessary to include a headlight of headlights on 10 with, to switch off light and other consumers).
3. Periodically it is necessary to check the battery the special loading device. At a room temperature pressure on the battery should not fall below 9,6 Century


1. Disconnect from the battery cables.
2. Unscrew nuts of fastening (arrow) and disconnect a fastening collar, remove the battery.
3. At battery replacement be convinced that parametres of the new battery (dimensions, capacity and a return current) precisely same, as at the replaced.