Toyota Camry

1996-2001 of release

Repair and car operation

3.2.1. Technical characteristics

THE GENERAL DATA

Kind of an impellent compartment of models with the 6-cylinder engine

1. A tank of a brake liquid 2. A casing of the air filter 3. The accumulator 4. Щуп for measurement of level of a liquid of an automatic transmission 5. A cover маслозаливной engine mouths 6. The oil filter

7. Щуп for measurement of level of oil of the engine 8. A radiator hose 9. A liquid tank стекломывателей 10. A broad tank of system of cooling of the engine 11. A tank of a liquid of system of hydrostrengthening

Engine marks	1MZ-FE
Numbering of cylinders (from газораспределительного a belt to a transmission)
The right number	1 – 3 – 5
The left number	2 – 4 – 6
Sequence of work of cylinders	1 – 2 – 3 – 4 – 5 – 6
Volume	3,0 litres
Head of cylinders
Admissible deformation of surfaces:
– Heads	0,099
– An inlet collector	0,079
– A final collector	0,498
Camshaft
Valve backlash (the engine cold):
– The inlet	0,127 – 0,229
– The final	0,280 – 0,381
Diameter of a neck of the bearing:
– A shaft of inlet valves	26,950 – 26,965
– A shaft of final valves	26,957 – 26,974
Lubricant backlash of bearings
The standard:
– A shaft of inlet valves	0,035 – 0,071
– A shaft of final valves	0,026 – 0,061
The limiting:
– A shaft of inlet valves	0,099
– A shaft of final valves	0,089
Cam height
Shaft of inlet valves:
– The standard	42,111 – 42,210
– The limiting	41,961
Shaft of final valves:
– The standard	41,961 – 42,060
– The limiting	41,811
Axial backlash:
– The standard	0,041 – 0,089
– The limiting	0,119
– As much as possible admissible palpation	0,061
District backlash of camshafts:
– The standard	0,020 – 0,201
– The limiting	0,478
Trailer backlash of a spring of a gear wheel of a camshaft	18,085 – 18,796
Ledge натяжителя газораспределительного a belt	10,008 – 10,795
Lifts:
– External diameter	30,965 – 30,975
– Diameter of a nest	31,001 – 31,016
Lubricant backlash:
– The standard	0,023 – 0,051
– The limiting	0,071
The oil pump
Backlash between a conducted gear wheel and a casing:
– The standard	0,099 – 0,175
– The limiting	0,300
Backlash between a teeth of gear wheels:
– The standard	0,109 – 0,239
– The limiting	0,351
Backlash between planes of gear wheels and a pump plane:
– The standard	0,031 – 0,089
– The limiting	0,150

The moments of an inhaling of carving connections, Н.м.

Bolts of an arm of the compressor of a central air	26
Bolts of the bottom part of an inlet collector	15
Bolts of the top chamber of an inlet collector	43
Bolts of an arm of the top chamber of a collector	19
Bolts of a final collector	49
Bolt of a pulley of a cranked shaft	216
Cover bolts газораспределительного a belt	8
Bolts of intermediate pulleys
– Pulley N1	34
– Pulley N2	43
Bolts натяжителя газораспределительного a belt	27
Bolts of a pulley of a camshaft	128
Bolts of covers of bearings of a camshaft	16
Bolts of a head of cylinders
– A step 1	54
– A step 2	Tighten on 90 degrees
Bolts of a head of cylinders (drowned)	18
Bolts of the oil pallet
Aluminium section	19
Steel section	8
Bolts of the oil pump
Bolts with a head of 10 mm	8
Bolts with a head 12 mm,	10
Bolts with a head of 14 mm	35
Assembly bolts маслозаборного a branch pipe	8
Bolts of a flywheel / of a leading disk	83
Bolts of a casing of a back epiploon of a cranked shaft	8
Nuts of a cover of a head of cylinders	8
Engine fastenings
Bolts of adjusting draught of displacement of the engine	64
Bolts, fastening a forward support to a body
The green	65
The silver	43
Only models Camry, all bolts	80
Bolts of the shock-absorber of a forward support	48
Nuts of a back support	65