Toyota Camry

1996-2001 of release

Repair and car operation

3.4.15. The basic malfunctions of an electric equipment

THE GENERAL DATA

THE REASON	ELIMINATION METHOD
The starter does not rotate after ignition inclusion
The storage battery is discharged	To charge the storage battery.
Breakage in a wire 50 to the lock of the switch of ignition, is damaged a wire of the switch of ignition	To eliminate breakage, to replace the damaged parts.
Breakage of a wire or weight conclusion. The storage battery is discharged	To check up a wire and a conclusion of the storage battery. To measure pressure of the storage battery, if necessary to charge it.
Insufficient receipt of a current because of the free or oxidised connections	To clear poles and plugs of the storage battery. Обемпечит necessary connection between the storage battery, a starter and weight.
Absence of pressure on a conclusion 50 (the traction relay). Breakage in a wire, is damaged the ignition switch	To eliminate breakage, to replace the damaged parts.
The starter works too slowly and does not rotate the engine
The storage battery is discharged	To charge the storage battery.
The engine is not filled by all-weather or winter oil	To fill all-weather oil.
Insufficient current strength because of the free or oxidised tips of wires	To smooth out polar conclusions of storage batteries, a starter and tips of wires, to tighten connections.
Brushes do not contact to a collector, I am got jammed in the оправках, are worn out made oily or polluted	To check up brushes, to clear or replace. To check up щеткодержатель.
Inadequate backlash between brushes and a collector	To replace brushes and to clear щеткодержатель.
On a collector a deposit, risks, pollution	Переточить a collector or to replace an anchor.
Absence of pressure on a conclusion 50 (a minimum 80В)	To check up switching of the switch of ignition or the traction relay.
Bearings are beaten out	To check up bearings, if necessary to replace.
The traction relay is damaged	To replace the traction relay.
The starter is hooked and starts to work, but the engine does not rotate or rotates jerky
The gear mechanism (the mechanism of a gear wheel of a drive) is damaged	To replace the gear mechanism.
The drive gear wheel is polluted	To clear a gear wheel.
The gear wreath on a flywheel is damaged	To repair a gear wreath, if necessary to replace a flywheel
The gear mechanism is not separated
The gear mechanism or screw шлицы are polluted or damaged	To clear or replace the gear mechanism.
The traction relay is damaged	To replace the traction relay.
Has burst or ослабла a returnable spring	To replace a spring.