Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
- 12. An electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crosspieces
      12.1.5. Breakers
      12.1.6. The relay
      12.1.7. The breaker of indexes of turn / of the alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. The lock of ignition and a lock drum
      12.1.10. Switches of the panel of devices
      12.1.11. Indexes of level of fuel and oil temperature
      12.1.12. A guard of devices
      12.1.13. The screen wiper electric motor
      12.1.14. The receiver and dynamics
      12.1.15. The aerial
      12.1.16. A heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. The case галогенной headlights
      12.1.20. A sound signal
      12.1.21. Replacement of lamps
      12.1.22. Lateral mirrors with the electric drive
      12.1.23. Cruise-control system
      12.1.24. The electric drive window lifterа
      12.1.25. The electric drive of door-locks
      12.1.26. Safety pillows
   + 12.2. Electroschemes


75acfaa4

12.1.21. Replacement of lamps

LAMPS OF LATERAL INDEXES OF TURN / OF THE DIMENSIONAL LANTERN

PERFORMANCE ORDER
1. Turn away the screw (or remove a latch) top fastening (arrow), submit the lantern case outside, having turned it on an axis, turn the holder of a lamp counter-clockwise and get a lamp from the case.
2. The lamp is established upside-down.

LAMPS OF BACK INDEXES OF TURN / OF BACK LANTERNS / THE BRAKING SIGNAL

PERFORMANCE ORDER
1. On models Avalon turn away 2 screws, submit the case sideways and remove an optical element.
2. On models Camry and Solara for access to 3 lamps which are in a body, cast away a luggage carrier rug (in drawing on the right – an arrangement of lamps on models Avalon).
3. Turn the holder counter-clockwise and remove.
4. For access to the lamps located in a cover of a luggage carrier, it is necessary to open covers on sticky fasteners.
5. Installation is carried out upside-down.

LAMPS OF ILLUMINATION OF LICENSE PLATE

PERFORMANCE ORDER
1. Remove facing of a cover of a luggage carrier (arrows fastening latches are shown).
2. Turn out cartridges of lamps (marksman) and replace lamps.
3. The lamp is established upside-down.

LAMPS OF THE TOP SIGNAL OF BRAKING

PERFORMANCE ORDER
1. The lamp plafond fastens to a ware tray latches from below, from outside a luggage carrier. On a part of models Solara on a luggage carrier cover spoilers with braking signals are established.
2. For replacement of lamps it is necessary to turn away 2 screws of fastening of an optical element and to get the panel with lamps.
3. Turn the holder of a lamp counter-clockwise and get. Pull a lamp and get from the holder.
4. Installation is carried out upside-down.

LAMPS ON THE GUARD OF DEVICES

PERFORMANCE ORDER
1. Remove a guard of devices. Lamps get from the back party of a guard.
2. To take turn a lamp counter-clockwise.
3. Installation is carried out upside-down.

LAMPS OF INTERNAL ILLUMINATION

PERFORMANCE ORDER
Remove a plafond of internal illumination and hook a lamp for edge (lamps are inserted in spring holders).