Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
- 12. An electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crosspieces
      12.1.5. Breakers
      12.1.6. The relay
      12.1.7. The breaker of indexes of turn / of the alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. The lock of ignition and a lock drum
      12.1.10. Switches of the panel of devices
      12.1.11. Indexes of level of fuel and oil temperature
      12.1.12. A guard of devices
      12.1.13. The screen wiper electric motor
      12.1.14. The receiver and dynamics
      12.1.15. The aerial
      12.1.16. A heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. The case галогенной headlights
      12.1.20. A sound signal
      12.1.21. Replacement of lamps
      12.1.22. Lateral mirrors with the electric drive
      12.1.23. Cruise-control system
      12.1.24. The electric drive window lifterа
      12.1.25. The electric drive of door-locks
      12.1.26. Safety pillows
   + 12.2. Electroschemes


75acfaa4

12.1.20. A sound signal
THE GENERAL DATA

The prevention

At signal refusal at first check up safety locks.


Check

PERFORMANCE ORDER
1. Disconnect from a signal a socket.
2. Directly connect to a signal the battery. In the absence of a sound a signal replace.
3. If the sound is, check up pressure on a conclusion by pressing the signal button (the right arrow). In the presence of pressure check up connection with weight.
4. If pressure is not present, check up the relay. It is necessary to consider that relays of a sound signal basically have 4 or 3 conclusions (3-vyvodnye relays have connection with weight through the case).
5. If the relay is serviceable, check up pressure on relay conclusions. If pressure is not present, check up wires from a safety lock to the relay.
6. If on conclusions of the relay pressure is, press the button of a signal and check up a chain of connection with weight between the relay and the button. If breakage is not present, replace the signal button.
7. If through the button the chain on weight becomes isolated, check up presence in a chain from the relay on the breakage or short circuit button.

Replacement

PERFORMANCE ORDER
1. For replacement of a sound signal disconnect a socket and turn away a bolt.
2. Installation is carried out upside-down.