|
|
Toyota Camry1996-2001 of releaseRepair and car operation |
|
|
Toyota Camry + 1. The maintenance instruction + 1.2. The information before car driving + 1.3. Independent maintenance service + 1.4. Technical characteristics + 1.5. Some councils at car purchase + 2. Maintenance service + 3. Engines + 4. Cooling system + 5. Heating and ventilation + 6. Fuel system + 7. An exhaust system + 8. Transmission + 9. A running gear + 10. Brake system + 11. A body - 12. An electric equipment - 12.1.2. Search of malfunctions 12.1.3. Safety locks 12.1.4. Fusible crosspieces 12.1.5. Breakers 12.1.6. The relay 12.1.7. The breaker of indexes of turn / of the alarm system 12.1.8. A combination of switches on a steering column 12.1.9. The lock of ignition and a lock drum 12.1.10. Switches of the panel of devices 12.1.11. Indexes of level of fuel and oil temperature 12.1.12. A guard of devices 12.1.13. The screen wiper electric motor 12.1.14. The receiver and dynamics 12.1.15. The aerial 12.1.16. A heater of back glass 12.1.17. Lamps of headlights 12.1.18. Headlights 12.1.19. The case галогенной headlights 12.1.20. A sound signal 12.1.21. Replacement of lamps 12.1.22. Lateral mirrors with the electric drive 12.1.23. Cruise-control system 12.1.24. The electric drive window lifterа 12.1.25. The electric drive of door-locks 12.1.26. Safety pillows + 12.2. Electroschemes 
|
12.1.13. The screen wiper electric motor
Pressure presence on the electric motor
Check The prevention At too slowed down course of brushes check up a battery condition. If the battery is charged, remove the electric motor of a screen wiper and check up by hand freedom of moving of brushes. If necessary grease all шарнирные connections or repair. If this measure does not give result check up a condition of contacts, especially connections with weight. If all connections in a normal state the electric motor replace. If the screen wiper does not work, check up a safety lock. If the safety lock is serviceable, connect the electric motor to weight a separate crosspiece. If the electric motor joins, repair connection with weight. Otherwise include a screen wiper and disconnect an electric motor socket. Check up pressure presence on the electric motor (pressure Presence fig. see the electric motor). If pressure is, check up the electric motor, having connected it to the battery through a thin delay. If the electric motor joins, check up freedom of moving of draught. Otherwise replace the electric motor. In the absence of pressure on the electric motor check up pressure on the switch. If pressure on the switch is not present, check up conducting from a safety lock to the switch. If conducting is serviceable, the switch is faulty. If brushes work only on one speed check up conducting and a chain between electric motor conclusions. If conducting is serviceable replace the switch. If frequency of work of brushes is not regulated, check up conducting between the electric motor and the switch. If conducting is serviceable, replace a regulator. If brushes do not come back in the parked position at deenergizing check up pressure on the electric motor at the included ignition and the switched off cleaner. If pressure is, the trailer switch in the electric motor is faulty. Replace the electric motor. If pressure is not present, check up and repair conducting between a safety lock and the electric motor. If brushes continue to work until then ignition disconnect a socket from the switch will not be switched off yet. If brushes stop, replace the switch. Otherwise the trailer switch in the electric motor is faulty. Replace the electric motor. If brushes do not reach parking position check up presence of stirring subjects and draught jamming. If everything is all right, check up conducting between the electric motor and the switch. If conducting is serviceable, replace the electric motor. |
|