Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
- 12. An electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crosspieces
      12.1.5. Breakers
      12.1.6. The relay
      12.1.7. The breaker of indexes of turn / of the alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. The lock of ignition and a lock drum
      12.1.10. Switches of the panel of devices
      12.1.11. Indexes of level of fuel and oil temperature
      12.1.12. A guard of devices
      12.1.13. The screen wiper electric motor
      12.1.14. The receiver and dynamics
      12.1.15. The aerial
      12.1.16. A heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. The case галогенной headlights
      12.1.20. A sound signal
      12.1.21. Replacement of lamps
      12.1.22. Lateral mirrors with the electric drive
      12.1.23. Cruise-control system
      12.1.24. The electric drive window lifterа
      12.1.25. The electric drive of door-locks
      12.1.26. Safety pillows
   + 12.2. Electroschemes

12.1.10. Switches of the panel of devices

THE GENERAL DATA

THE SWITCH OF THE EMERGENCY LIGHT ALARM SYSTEM

The switch of the emergency light alarm system and the diagramme for its check

Switch position

Tested conclusions

Chain presence

OFF it (is switched off)

7 – 10

There is a chain

ON it (is included)

5 – 6 – 9
7 – 8

There is a chain

Illumination chain

2 – 3

There is a chain

The switch is mounted in the central part of the panel of devices.

Check

Check up chain presence between the specified conclusions. Replace the switch, if results at least with one of checks the negative.
Replacement

PERFORMANCE ORDER

1. Remove facing in the central part of the panel of devices.

2. Submit the switch upwards and disconnect a socket, press a latch (it is specified by an arrow) and get the switch.

THE SWITCH OF THE ELECTRIC DRIVE OF THE MIRROR

The switch of the electric drive of a mirror (Camry, Solara)

Switch position

Tested conclusions

Chain presence

Off

–

There is no chain

Upwards

1 – 9, 6 – 10

There is a chain

Downwards

1 – 10, 6 – 9

There is a chain

To the left

5 – 9, 6 – 10

There is a chain

To the right

5 – 10, 6 – 9

There is a chain

Switch position

Tested conclusions

Chain presence

Off

–

There is no chain

Upwards

6 – 10, 7 9

There is a chain

Downwards

6 – 9, 7 10

There is a chain

To the left

6 – 10, 8 9

There is a chain

To the right

6 – 9, 8 10

There is a chain

The switch of the electric drive of a mirror (Avalon)

LEFT-HAND SIDE

Switch position

Tested conclusions

Chain presence

Off

–

There is no chain

Upwards

2 – 6, 1 – 3 – 8

There is a chain

Downwards

3 – 6, 1 – 2 – 8

There is a chain

To the left

1 – 3 – 6, 2 – 8

There is a chain

To the right

1 – 2 – 6, 3 – 8

There is a chain

THE RIGHT PARTY

Switch position

Tested conclusions

Chain presence

Off

–

There is no chain

Upwards

2 – 5, 1 – 3 – 7

There is a chain

Downwards

3 – 5, 1 – 2 – 7

There is a chain

To the left

1 – 3 – 5, 2 – 7

There is a chain

To the right

3 – 7, 1 – 2 – 5

There is a chain

The switch is mounted on the panel of devices on the left side – under a ventilating nozzle on models Camry and Avalon, or to the right of a nozzle on models Solara.

Check

PERFORMANCE ORDER

1. Check up chain presence between the specified conclusions. Replace the switch if results at least with one of checks the negative.

Replacement

PERFORMANCE ORDER

1. Cautiously hook and get the switch.

2. Disconnect a socket and remove the switch.

3. Establish the switch upside-down.

THE SWITCH OF THE CONTROL OF DRAUGHT

The switch of the control of draught works together with ABS-system to improve draught in some road conditions. The switch is mounted on the panel to the left of a wheel.

Check

PERFORMANCE ORDER

1. Check up chain presence between switch conclusions, having got it. By pressing contacts should become isolated, and at release – to be opened. Otherwise the switch replace.

Replacement

PERFORMANCE ORDER

1. Cautiously hook and get the switch.

2. Disconnect a socket and remove the switch.

3. Establish the switch upside-down.

THE ILLUMINATION SWITCH ON THE PANEL OF DEVICES

Check of the switch of illumination on the panel of devices

At rotation of the handle pressure between conclusions 2 and 3 should vary.

On considered cars it is applied or the disk switch of illumination which is mounted in the top left part of the panel of devices, or the switch with the taken out handle, located under the left ventilating nozzle on the panel of devices. Switches of both types are combined with a rheostat which is intended for illumination adjustment.

Check

PERFORMANCE ORDER

1. On the removed switch check up a rheostat for what execute connections under the scheme (see fig. Check of the switch of illumination the panel of devices). At rotation of the handle pressure between conclusions 2 and 3 should vary. Otherwise the switch replace.

Replacement

On cars with an illumination rheostat under the left nozzle hook and get the switch. For replacement of the disk switch it is necessary to remove a guard of devices.