Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Pressure dump in fuel system
   6.4. The fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. A regulator of pressure of fuel
   6.8. The gauge of the index of level of fuel
   6.9. A fuel tank
   6.10. Cleaning and repair of a fuel tank
   6.11. A casing of the air filter
   6.12. An accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. A throttle
   6.15. A fuel highway and injectors
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


6.8. The gauge of the index of level of fuel Check

1. Lower pressure in system. Disconnect a wire of the minus plug of the accumulator.
2. Remove the block of the fuel pump.
3. Disconnect a wire of the gauge and connect an ohmmeter to contacts 2 and 3. Measure resistance of the gauge when the measuring instrument lever is lowered completely downwards (a tank it is empty) approximately 110–115 Ohm and when the lever is completely lifted (a tank is full) approximately 2–3 Ohm. At moving of the lever resistance should change in regular intervals.
4. If necessary replace the gauge.


1. Unscrew screws (are specified by arrows) and press an ear And and pull the gauge upwards to remove it.
2. Establish the new gauge.