Toyota Camry

1996-2001 of release

Repair and car operation


Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Pressure dump in fuel system
   6.4. The fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. A regulator of pressure of fuel
   6.8. The gauge of the index of level of fuel
   6.9. A fuel tank
   6.10. Cleaning and repair of a fuel tank
   6.11. A casing of the air filter
   6.12. An accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. A throttle
   6.15. A fuel highway and injectors
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

6.6. Removal and installation of the fuel pump
THE GENERAL DATA

The fuel pump – type And
1. A cover
2. A wire of the fuel pump and the gauge
3. A protective casing
4. A plate
5. A fuel hose
6. A socket
 7. The fuel pump
8. The filter of the fuel pump
9. A clip
10. A rubber lining
11. A lining
12. The fuel pump in assemblage

The fuel pump – type In
1. The gauge of level of fuel
2. A flange of the fuel pump
3. A sealing ring
4. The fuel filter
5. The fuel pump
6. A pump casing
7. The filter of the fuel pump
8. A clip
 9. A rubber lining
10. An arm
12. A lining
13. The fuel pump in gathering
14. A plate
15. A protective casing
16. A wire of the fuel pump and the gauge
17. A cover

Removal

PERFORMANCE ORDER
1. Lower pressure in fuel system, and uncover a jellied mouth of a fuel tank.
2. Disconnect a wire of the minus plug of the accumulator.
3. Remove back sitting.
4. Uncover in a floor.
5. Disconnect a wire and a fuel tube. If connection with развальцовкой is used, disconnect a fuel tube by means of wrenches. If quick disconnect connection is used, unscrew screws (are specified by arrows in drawing on the right) and remove a protective casing of connection.
6. Unscrew bolts of the block of the fuel pump and the gauge of level of fuel.
7. Get the block from a fuel tank.
8. Disconnect a wire from the pump.
9. Compress a clamp of a hose of the pump and remove a clamp.
10. Release the bottom part of the pump and disconnect the pump from a hose.
11. To remove the type pump In, unscrew the screw (it is specified by an arrow) the fuel filter and remove the filter.
12. By turns hook latches on a pump flange.
13. Подденте latches also remove the bottom arm of the pump.
14. Remove a clamp and disconnect the filter from the pump. If necessary replace the filter.

Installation

Installation is spent upside-down removals.