Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Pressure dump in fuel system
   6.4. The fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. A regulator of pressure of fuel
   6.8. The gauge of the index of level of fuel
   6.9. A fuel tank
   6.10. Cleaning and repair of a fuel tank
   6.11. A casing of the air filter
   6.12. An accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. A throttle
   6.15. A fuel highway and injectors
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


6.15. A fuel highway and injectors Removal

1. Disconnect a wire of the minus plug of the accumulator.
2. Pit pressure in fuel system.
3. In six-cylinder engines unscrew two bolts (are specified by arrows in drawing at the left) and shift the block of operating coils of the vacuum valve aside.
4. Disconnect wires from injectors.
5. Disconnect tubes of giving of fuel from a fuel highway.
6. Unscrew bolts of a fuel highway (are specified by arrows). In drawing at the left – 4-cylinder engines, on the right – 6-cylinder.
7. Remove a fuel highway together with injectors.
8. Remove injectors from nests of a fuel highway.
9. If you are going to reuse an injector, replace its sealing rings.


Installation is spent upside-down removals.