Toyota Camry

1996-2001 of release

Repair and car operation


Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Pressure dump in fuel system
   6.4. The fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. A regulator of pressure of fuel
   6.8. The gauge of the index of level of fuel
   6.9. A fuel tank
   6.10. Cleaning and repair of a fuel tank
   6.11. A casing of the air filter
   6.12. An accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. A throttle
   6.15. A fuel highway and injectors
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

6.14. A throttle
THE GENERAL DATA

Four-cylinder engines

1. Vacuum hoses
2. A lining
3. A hose of the system catching steams of fuel
4. A casing throttle заслонки
5. A wire of the gauge of position throttle заслонки
6. A wire
7. A pipe connecting a throttle with the air filter
 8. Roundabout a hose of a cooling liquid
9. An air hose
10. Roundabout a hose of a cooling liquid
11. A rope throttle заслонки
12. An accelerator rope
13. A hose of the system catching steams of fuel
14. The temperature gauge of system recycling final gases.

Functioning of vacuum ports of a throttle – 4-cylinder models
The port name
Idling
Other modes
Р
There is no vacuum
Vacuum
Е
There is no vacuum
Vacuum
R
There is no vacuum
There is no vacuum

Check
PERFORMANCE ORDER
1. Examine the lever mechanism, it should function smoothly and not заедать.
2. Get the engine, by turns disconnect vacuum hoses from a throttle. Whether check up there is a vacuum idling and at higher turns. Compare results of check to the data of the table Functioning of vacuum ports of a throttle – 4-cylinder models.
3. Remove воздухозаборную a pipe and check up a throttle on deposit and dirt presence. If necessary wash out a throttle a special solution for cleaning of carburettors.

Replacement

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove воздухозаборную a pipe connecting the case of a throttle with the air filter.
3. Disconnect a rope of an accelerator from the lever throttle заслонки.
4. Disconnect from a casing of a throttle hoses and wires.
5. Disconnect a wire from the gauge of position throttle заслонки.
6. Unscrew assembly bolts of a throttle.
7. Disconnect a throttle from an inlet collector.
8. Installation is spent upside-down removals.