Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
- 11. A body
   11.2. Vinyl furnish
   11.3. An upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. A windscreen and motionless glasses
   11.8. The central lock
   11.9. A cowl
   11.10. The lock of a cowl and a cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. A forward wing
   11.13. A luggage carrier cover
   11.14. A latch and the lock of a cover of a luggage carrier
   11.15. A cable of a drive of unlocking of a door of a fuel tank / of a cover of a luggage carrier
   11.16. Facing panels of doors
   11.17. A door
   11.18. A latch, the lock of a door and the handle
   11.19. Door glass
   11.20. Стеклоподъемник
   11.21. Mirrors
   11.22. The central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. The panel of devices
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. A ware tray
+ 12. An electric equipment

11.18. A latch, the lock of a door and the handle
LATCH

PERFORMANCE ORDER

1. Lift glass and remove facing of a door and a water filter (subsection 11.16 see.).

2. Through an aperture in a door skeleton disconnect draughts from the external handle to a latch, from the lock to a latch and from the internal handle to a latch. The latch fastens to an end face of a door three screws.

3. All draughts of the mechanism of lock-out fasten plastic скобами. For their detachment hook скобу in a place of gearing with draught and remove draught from an aperture. On cars with the lock electric drive disconnect from a latch a socket.

4. Turn away screws and remove a latch through an aperture in a door skeleton.

5. Installation is carried out upside-down.

THE EXTERNAL HANDLE OF THE DOOR AND THE LOCK

PERFORMANCE ORDER

1. Lift glass, remove facing of a door and a water filter (subsection 11.16 see.).

2. Through an aperture in a door skeleton disconnect draught () from the external handle to a latch and turn away bolts of fastening of the lock and the handle ().

The prevention
It is possible to turn on also bolts and to get the handle outside that facilitates a draught detachment.

3. Remove the handle and the lock. If necessary disconnect draught in the hinge (), remove a lock ring or disconnect a socket In and отвентите a bolt From fastening of the switch of the lock (on models with the lock electric drive).

4. Installation is carried out upside-down.