Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
- 11. A body
   11.2. Vinyl furnish
   11.3. An upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. A windscreen and motionless glasses
   11.8. The central lock
   11.9. A cowl
   11.10. The lock of a cowl and a cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. A forward wing
   11.13. A luggage carrier cover
   11.14. A latch and the lock of a cover of a luggage carrier
   11.15. A cable of a drive of unlocking of a door of a fuel tank / of a cover of a luggage carrier
   11.16. Facing panels of doors
   11.17. A door
   11.18. A latch, the lock of a door and the handle
   11.19. Door glass
   11.20. Стеклоподъемник
   11.21. Mirrors
   11.22. The central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. The panel of devices
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. A ware tray
+ 12. An electric equipment


75acfaa4

11.13. A luggage carrier cover
THE GENERAL DATA

The prevention

Works should be carried out together.


Removal

PERFORMANCE ORDER
1. Open a cover of a luggage carrier and cover the next panels of a body.
2. Remove internal facing of a cover and disconnect from a cover sockets of conducting of illumination of a luggage carrier, back lanterns and extend a cable of a drive of the lock (subsection 11.14 see.). Preliminary attach to a cable a piece of a wire of sufficient length.
3. Outline contours of loops of a cover.
4. Turn away bolts of fastening of a cover to loops and uncover.

Installation

Installation is carried out upside-down. At installation combine loops with the contours put at removal.

Adjustment

PERFORMANCE ORDER
1. Adjustment of position of a cover of a luggage carrier is across provided with cover moving to apertures under bolts of fastening of loops after their easing.
2. Cover position on height (and alignment of a cover with a surface of the next panels of a body) is regulated by moving of a clamp of the lock of a cover at the released bolts (arrow). Preliminary outline clamp contours.