Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
- 11. A body
   11.2. Vinyl furnish
   11.3. An upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. A windscreen and motionless glasses
   11.8. The central lock
   11.9. A cowl
   11.10. The lock of a cowl and a cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. A forward wing
   11.13. A luggage carrier cover
   11.14. A latch and the lock of a cover of a luggage carrier
   11.15. A cable of a drive of unlocking of a door of a fuel tank / of a cover of a luggage carrier
   11.16. Facing panels of doors
   11.17. A door
   11.18. A latch, the lock of a door and the handle
   11.19. Door glass
   11.20. Стеклоподъемник
   11.21. Mirrors
   11.22. The central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. The panel of devices
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. A ware tray
+ 12. An electric equipment


11.16. Facing panels of doors


1. On cars with a manual drive window lifterа remove the drive handle, having removed скобу a fabric.
2. Remove the button of blocking of the lock.
3. On cars with the electric drive window lifterа hook and remove a switch plate under which there is one of bolts of fastening of the panel (arrow).
4. Hook and remove an external cover of a mirror.
5. Hook and remove заглушку, turn away the screw.
6. In a forward part of a door remove plastic заглушки () and turn out screws ().
7. Hook and remove заглушку, turn away the screw in a back part of a door.
8. Cautiously hook and remove the panel from latches.
9. Submit the panel upwards, disconnect sockets and remove the panel.

10. For access to window lifterу or to the external handle of a door lift glass, remove the management block window lifterом (on a part of cars), an arm of the facing panel and динамик (subsection 12.1.14 see.).

11. Then cautiously remove a water filter.


Installation is carried out upside-down. Be preliminary convinced available all latches of door facing. Before panel installation into place connect all sockets.