Toyota Camry

1996-2001 of release

Repair and car operation


Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
- 11. A body
   11.2. Vinyl furnish
   11.3. An upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. A windscreen and motionless glasses
   11.8. The central lock
   11.9. A cowl
   11.10. The lock of a cowl and a cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. A forward wing
   11.13. A luggage carrier cover
   11.14. A latch and the lock of a cover of a luggage carrier
   11.15. A cable of a drive of unlocking of a door of a fuel tank / of a cover of a luggage carrier
   11.16. Facing panels of doors
   11.17. A door
   11.18. A latch, the lock of a door and the handle
   11.19. Door glass
   11.20. Стеклоподъемник
   11.21. Mirrors
   11.22. The central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. The panel of devices
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. A ware tray
+ 12. An electric equipment


75acfaa4

11.11. Decorative panels of bumpers

FORWARD BUMPER

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Disconnect negative and then the positive plug from the battery and wait not less than 2 minutes.

3. On models Camry turn away a bolt of fastening of the panel of a bumper and remove plastic percussion caps of fastening of the panel of a bumper.
The prevention

Buttons of the central percussion caps hook a small screw-driver, buttons not to delete, as they запрессованы in steel футорки.
4. On models Avalon turn away two screws and remove percussion caps of fastening of a lattice (arrow).
5. Then disconnect sockets of antifog lanterns (if are provided) and turn away bolts (arrows) of fastening of the panel of a forward bumper.
6. Remove two bottom percussion caps.
7. Then turn away screws (arrows) of fastening грязезащитных panels to the bottom part of a bumper then access to a bolt of fastening of the panel of a bumper to the bottom part of a wing (model Avalon) is provided.
8. Installation is carried out upside-down. At installation be preliminary convinced that latches from the back party of a bumper have come in corresponding скобы on a body. The bumper is expedient for establishing together.

BACK BUMPER

Details of fastening of a back bumper (model Avalon)

PERFORMANCE ORDER
1. Remove plastic percussion caps (arrows) and turn away screws of fastening of the bottom edge of the panel of a bumper (model Camry).
2. Turn away a nut of fastening of a bumper on corners in a luggage carrier. For access to nuts remove facing.
3. Open a cover of a luggage carrier and remove percussion caps (arrows) or скобы, fastening the top edge of the panel of a bumper. Remove the bumper panel.
The prevention

Buttons of the central percussion caps hook a small screw-driver, buttons not to delete, as they запрессованы in steel футорки. For removal of bolts from body apertures at jamming it is possible to beat out a bolt easy blows of a plastic hammer.
4. Installation is carried out upside-down.