Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
- 11. A body
   11.2. Vinyl furnish
   11.3. An upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. A windscreen and motionless glasses
   11.8. The central lock
   11.9. A cowl
   11.10. The lock of a cowl and a cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. A forward wing
   11.13. A luggage carrier cover
   11.14. A latch and the lock of a cover of a luggage carrier
   11.15. A cable of a drive of unlocking of a door of a fuel tank / of a cover of a luggage carrier
   11.16. Facing panels of doors
   11.17. A door
   11.18. A latch, the lock of a door and the handle
   11.19. Door glass
   11.20. Стеклоподъемник
   11.21. Mirrors
   11.22. The central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. The panel of devices
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. A ware tray
+ 12. An electric equipment

11.12. A forward wing
Removal

PERFORMANCE ORDER

1. Lift the car and remove a wheel.

2. Remove a forward lantern of the index of turn / of lay illumination (subsection 1.3.5.2 see.).

3. The protective panel fastens bolts, screws and plastic latches (arrow).

4. Turn away screws and remove latches of fastening of the protective panel of a wheel niche, remove the panel and a mud guard.

5. Open a forward door and turn away a bolt of fastening of a wing to a body.

6. Turn away a bolt of the bottom fastening of a wing to a body.

7. Turn away a bolt of the panel of a bumper () in the bottom forward part of a wing, then a bolt of fastening of a wing to an arm ().

8. After removal of the case of a lantern of the index of turn / of lay illumination turn away a bolt of fastening of a forward wing to an arm (marksman).

9. Turn away three bolts of fastening along the top part of a wing.

10. Working with the assistant, raise and remove a wing.

Installation
Installation is carried out upside-down. Before an inhaling of bolts check up coincidence of a surface of a wing to door and cowl surfaces.