Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
- 10. Brake system
   10.2. Technical characteristics
   10.3. ABS-system
   10.4. Колодки disk brakes
   10.5. A brake support
   10.6. A brake disk
   10.7. Колодки drum-type brakes
   10.8. The wheel cylinder of brakes
   10.9. The main cylinder of brakes
   10.10. Hoses and hydrodrive tubes
   10.11. Removal of air from a hydrodrive of brakes
   10.12. The vacuum amplifier of brakes
   10.13. Колодки a lay brake of back disk brakes
   10.14. A lay brake
   10.15. Cables of a lay brake
   10.16. The switch of a signal of braking
   10.17. ABS: a natural choice
   10.18. Malfunctions of brake system
+ 11. A body
+ 12. An electric equipment

10.8. The wheel cylinder of brakes

THE GENERAL DATA

The prevention
Cylinders vary only in steam on an axis.

Removal

PERFORMANCE ORDER

1. Lift a back part of the car.

2. Remove Pads (subsection 10.4 see. And subsection 10.7.).

3. Clear the wheel cylinder.

4. Turn away the hydrodrive union. Arrows specify bolts of fastening of the wheel cylinder.

5. Turn away bolts of fastening of the cylinder.

6. Remove the cylinder and muffle a tube.

Installation

PERFORMANCE ORDER

1. Establish the cylinder, wrap bolts by hand. Wrap the union and tighten fastening bolts.

2. Tighten the union and establish Pads and a drum.

3. Remove air from a hydrodrive.

4. Establish a wheel, lower the car and check up work of brakes.