Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
- 10. Brake system
   10.2. Technical characteristics
   10.3. ABS-system
   10.4. Колодки disk brakes
   10.5. A brake support
   10.6. A brake disk
   10.7. Колодки drum-type brakes
   10.8. The wheel cylinder of brakes
   10.9. The main cylinder of brakes
   10.10. Hoses and hydrodrive tubes
   10.11. Removal of air from a hydrodrive of brakes
   10.12. The vacuum amplifier of brakes
   10.13. Колодки a lay brake of back disk brakes
   10.14. A lay brake
   10.15. Cables of a lay brake
   10.16. The switch of a signal of braking
   10.17. ABS: a natural choice
   10.18. Malfunctions of brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

10.5. A brake support
THE GENERAL DATA

Details of a forward brake (for models with the 4-cylinder engine)

1. A support
2. A support arm
3. A sealant
4. A finger
5. A rubber cover
6. Clamps колодок (for cars with the engine 5S-FE)
7. Clamps колодок (for cars with the engine 1MZ-FE)
8. Antinoise plates
9. An internal antinoise plate
10, 13. A spring of an antinoise plate
11. Internal колодка
12. External колодка
14. The deterioration index Pads (for cars with the engine 1MZ-FE)
15. A cover
16. An epiploon
17. A finger
18. A sealing ring of the piston
19. A restrictive ring of the piston
20. The piston
21. The union for brake prorolling

Details of a forward brake (for models with the 6-cylinder engine)

1. A support
2. A support arm
3. A disk
4. A sealant
5. A finger
6. An epiploon
7. A rubber cover
8. Clamps колодок
9. Antinoise plates
10. A spring of an antinoise plate

11. External колодка
12. Internal колодка
13. The deterioration index Pads
14. A cover
15. A finger
16. An external sealant
17. A restrictive ring of the piston
18. The piston
19. A sealing ring of the piston
20. The union for prorolling of brakes


Details of a back brake

1. A sealant
2. A support
3. The union for prorolling of brakes
4. A cover of an axis of a support
5. An external sealant of the piston
6. The piston
7. A sealing ring of the piston
8. A restrictive ring of the piston
9. An epiploon

10. A clamp Pads
11. Колодка
12. An internal antinoise plate
13. An antinoise plate
14. A rubber cover
15. A support in gathering
16. A support arm
17. Заглушка
18. A disk

Removal
The prevention

Supports vary in steam on one axis.


PERFORMANCE ORDER
1. Lift the car and remove wheels.
2. Close an aperture of the union of a hose of a brake a piece of a rubber hose of suitable diameter. Turn away a bolt of the union and disconnect a brake hose.
3. Turn away bolts of fastening and remove a support.
4. If necessary remove an arm from a rotary fist or an arm of a back axis, having turned away the bolts specified by arrows. In drawing at the left – an arm of a forward support, on the right – back.

Installation

Installation is carried out upside-down. Tighten all bolts with the set moment. Remove air from a hydrodrive of brakes.