Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
- 9. A running gear
   - 9.1.2. Technical characteristics
      9.1.3. The stabilizer of cross-section stability of a forward suspension bracket
      9.1.4. A rack of a forward suspension bracket
      9.1.5. A rack and a suspension bracket spring
      9.1.6. The suspension bracket lever
      9.1.7. Spherical support
      9.1.8. A rotary fist and a nave
      9.1.9. A nave and the bearing of a forward wheel
      9.1.10. The stabilizer and plugs of the stabilizer of a back suspension bracket
      9.1.11. A rack of a back suspension bracket
      9.1.12. A longitudinal bar
      9.1.13. Levers of a back suspension bracket
      9.1.14. A nave and the bearing of a back wheel
      9.1.15. An arm of a back suspension bracket
      9.1.16. Corners of installation of wheels
   + 9.2. A steering
   + 9.3. Semiaxes
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

9.1.14. A nave and the bearing of a back wheel

THE GENERAL DATA

Details of a nave of a back wheel with подшипниковым in knot

1. The cylinder
2. A brake disk
3. A nave of a back wheel with the bearing
4. A sealing ring of a nave
5. A brake drum

Removal
The prevention
Nave of a back wheel with the bearing to repair are not subject and vary as uniform knot.

PERFORMANCE ORDER

1. Lift a back part of the car and establish on supports. Remove a back wheel.

2. Remove a drum or a brake disk (subsection 10.6 see.).

3. Turn away 4 bolts of fastening of the case of a nave to a suspension bracket arm through apertures in a nave flange. For access to bolts the flange is necessary for turning.

4. Remove a nave in gathering with the bearing.

5. Remove a sealing ring of a nave.

Installation

PERFORMANCE ORDER

1. Establish a nave and combine apertures in the case of a nave with apertures under bolts in a brake board. Wrap bolts. At installation of bolts in carving apertures it is convenient to use a magnet. Tighten bolts with the set moment.

2. Establish a drum (or a disk) brakes, a support and a wheel. Establish a wheel and lower the car.