Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
- 9. A running gear
   - 9.1.2. Technical characteristics
      9.1.3. The stabilizer of cross-section stability of a forward suspension bracket
      9.1.4. A rack of a forward suspension bracket
      9.1.5. A rack and a suspension bracket spring
      9.1.6. The suspension bracket lever
      9.1.7. Spherical support
      9.1.8. A rotary fist and a nave
      9.1.9. A nave and the bearing of a forward wheel
      9.1.10. The stabilizer and plugs of the stabilizer of a back suspension bracket
      9.1.11. A rack of a back suspension bracket
      9.1.12. A longitudinal bar
      9.1.13. Levers of a back suspension bracket
      9.1.14. A nave and the bearing of a back wheel
      9.1.15. An arm of a back suspension bracket
      9.1.16. Corners of installation of wheels
   + 9.2. A steering
   + 9.3. Semiaxes
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

9.1.13. Levers of a back suspension bracket

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and establish on supports, block forward wheels. Remove a back wheel.
2. Disconnect a rack of a suspension bracket from an arm.
3. Remove average section of an exhaust pipe.
4. Turn away a nut and remove a bolt of fastening of the lever of a suspension bracket to an arm.
5. Turn away the bottom nut and remove a bolt of fastening of the lever to a suspension bracket cross-beam.
6. Remove lever N2.
7. Remove collars of plugs of the stabilizer.
8. Remove terminal section of an exhaust pipe.
9. Remove lever N1.

Installation

PERFORMANCE ORDER
1. Installation of levers of a suspension bracket is carried out upside-down. All carving connections tighten with the set moments.
2. Establish a wheel.
3. Check up and if necessary adjust corners of installation of back wheels in car-care centre.