Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
- 3. Engines
   - 3.1.2. Compression check
      3.1.3. The top dead point (ВМТ) piston N1
      3.1.4. A cover of a head of cylinders
      3.1.5. An inlet collector
      3.1.6. A final collector
      3.1.7. A gazoraspredelitelnyj belt and asterisks
      3.1.8. A forward epiploon of a cranked shaft
      3.1.9. A camshaft epiploon
      3.1.10. Camshafts and lifts of valves
      3.1.11. A head of cylinders
      3.1.12. The oil pallet
      3.1.13. The oil pump
      3.1.14. The Flywheel / a leading disk
      3.1.15. A back epiploon of a cranked shaft
      3.1.16. Engine fastenings
   + 3.2. 6-cylinder двухрядные engines V6 of 3,0 l
   + 3.3. A partition of engines
   + 3.4. An engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


3.1.4. A cover of a head of cylinders


1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect a ventilating hose from a head cover.
3. Disconnect wires from spark plugs.
4. Unscrew a bolt of a clamp of a plait of wires and shift wires aside.
5. Braid nuts of nests of spark plugs and uncover heads together with a lining.


1. Carefully clean surfaces of a cover and a head of cylinders.
2. Put hermetic on joined surfaces (are designated by shading). Establish condensing rings of nests of spark plugs, labels on rings should be directed aside газораспределительного a belt.
3. Establish a new lining of a cover, establish a cover and nuts of nests of spark plugs.
4. Tighten nuts till the demanded moment of an inhaling.
5. Establish the remained details, get the engine and check up it on presence of leaks.