Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
- 9. A running gear
   + 9.1.2. Technical characteristics
   - 9.2. A steering
      9.2.2. A steering wheel
      9.2.3. Tips of steering draughts
      9.2.4. Covers of the steering mechanism
      9.2.5. The steering mechanism
      9.2.6. The hydraulic booster pump
      9.2.7. Removal of air from a contour of the hydraulic booster of a wheel
   + 9.3. Semiaxes
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

9.2.7. Removal of air from a contour of the hydraulic booster of a wheel
THE GENERAL DATA

To remove air from a wheel hydrodrive it is necessary at any dismantling of a highway, irrespective of those measures against hit of air which have been accepted.

PERFORMANCE ORDER
1. Establish wheels in driving position on a straight line and check up liquid level, if necessary restore, having added to label Cold on probeе a tank.
2. Start the engine and after work on fast single to an engine course again check up liquid level, if necessary restore, having added to label Cold on probeе a tank.
3. Turn a wheel here and there against the stop, thus do not suppose strong impact with terminators, hold a wheel in the end of each course. Air thus leaves from a hydraulic booster contour. At performance of this procedure watch liquid level.
4. Establish wheels in driving position on a straight line and after some minutes stop the engine.
5. Again check up level of a liquid which should be on the heated-up engine about mark Hot on probeе a tank. If necessary add.