Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
- 8. Transmission
   + 8.1.2. Care manual transmission
   + 8.2. An automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. The vyzhimnoj bearing and a plug
      8.3.5. The main cylinder of coupling
      8.3.6. The working cylinder of coupling and the accumulator
      8.3.7. A coupling hydrodrive
      8.3.8. The blocking switch of coupling
      8.3.9. slip
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

8.3.4. The vyzhimnoj bearing and a plug

Removal
PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove transmission.
3. Remove a spring, get a plug of deenergizing of coupling, get from a plug выжимной the bearing.

Check

PERFORMANCE ORDER
Keeping an external holder check up freedom of rotation of the bearing. The bearing should rotate freely in a holder. Otherwise the bearing replace. To wash out the bearing in solvent it is forbidden.

Installation

PERFORMANCE ORDER
1. Grease an internal flute of the bearing, шлицы a primary shaft and the holder of the forward bearing of a primary shaft of a check point with refractory greasing.
2. Grease with refractory greasing dredging under a spherical support.
3. Grease with refractory greasing of a place of fastening of the bearing and dredging under a pusher of the working cylinder. Establish spring скобу.
4. Establish on a plug the bearing.
5. Dress the bearing on a primary shaft of a check point. Pass a plug through a cover and dress a plug on a support, having pressed on it before click.
6. Slightly grease with refractory greasing a surface of the bearing adjoining with диафрагменной by a spring.
7. Further assemblage is carried out upside-down.