Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
- 8. Transmission
   + 8.1.2. Care manual transmission
   + 8.2. An automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. The vyzhimnoj bearing and a plug
      8.3.5. The main cylinder of coupling
      8.3.6. The working cylinder of coupling and the accumulator
      8.3.7. A coupling hydrodrive
      8.3.8. The blocking switch of coupling
      8.3.9. slip
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

8.3.3. Coupling details
THE GENERAL DATA

Coupling details
1. A flywheel
2. A frictional disk
3. A coupling casing
4. A bolt
5. The vyzhimnoj bearing
6. A plug
7. A spherical support of a plug
8. A cover

Places of check of deterioration of a frictional disk

1. Overlays

2. Dempfernye springs

3. A nave

4. Rivets

Deterioration of petals of a spring

 
1. Nomalnyj deterioration of petals
2. The strengthened deterioration
3. The strengthened deterioration of petals
4. Breakage or deformation of petals of a spring

Removal

PERFORMANCE ORDER
1. At the description of procedures it is meant that works are carried out without engine removal.
2. Remove the working cylinder, take aside and fix.
3. Will hang out the engine and remove transmission. If the engine is propped up from below keep in mind that маслоприемник is located near to the pallet and at pallet deformation access of oil to the engine can be blocked.
4. Fix coupling, having inserted оправку.
5. Find adjusting labels (are designated by letters Х or), at their absence designate coupling position on a flywheel.
6. Gradually and in regular intervals in diagonal sequence release 6 bolts, yet ослабнет action of springs, then turn out bolts and remove a casing of coupling and a frictional disk.

Check

PERFORMANCE ORDER
1. As a rule replacement is demanded only by a frictional disk. Nevertheless it is necessary to examine a condition of all details.
2. Check up a flywheel condition. It is recommended to remove a flywheel and прошлифовать irrespective of a surface condition.
3. Check up a condition of a surface of frictional overlays, measure distance to heads of rivets of a disk which than 1,5 mm should be not less. Check up a condition of springs, easing of rivets, presence of other signs of damages (fig. of the Place of check of deterioration of a frictional disk see). It is recommended to replace a disk irrespective of its condition.
4. Together with a frictional disk as a rule varies and выжимной the bearing.
5. Check up a condition of a surface of a press disk, диафрагменной a spring and spring petals (fig. Deterioration of petals of a spring see). Small defects of a disk can be polished a skin, at major defects coupling replace.

Installation

PERFORMANCE ORDER
1. Carefully clear a flywheel and coupling.
2. Establish coupling, having combined labels, and wrap bolts by hand. The label "flywheel side" (to a flywheel) should be turned to a flywheel.
3. Centre a disk with the help оправки which should enter into flywheel deepening, gradually and in regular intervals, in a cross order, tighten coupling bolts.
4. Grease a flute выжимного the bearing and all rubbing surfaces with refractory greasing. Establish выжимной the bearing.
5. Establish transmission and all removed details.