Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. An exhaust system
   - 7.2. Systems of decrease in toxicity of the fulfilled gases
      7.2.2. Technical characteristics
      7.2.3. OBD II-system
      7.2.4. II-system computer OBD (Powertrain Control Module)
      7.2.5. The gauge of turn throttle заслонки
      7.2.6. The gauge of absolute pressure in a soaking up collector
      7.2.7. The gauge of the mass expense of air
      7.2.8. The gauge of temperature of soaked up air (IAT-gauge)
      7.2.9. The gauge of temperature of a cooling liquid (ECT-gauge)
      7.2.10. The rotation gauge коленвала
      7.2.11. The gauge of rotation of a cam-shaft
      7.2.12. The contact gauge of pressure of the hydraulic booster
      7.2.13. The gauge of the maintenance of oxygen in the fulfilled gases
      7.2.14. The detonation gauge
      7.2.15. The gauge of speed of the car
      7.2.16. Перепускной the air valve of idling (IAC-valve)
      7.2.17. System of a choice of the channel всасывания (ACIS-system)
      7.2.18. Ventilation system картера
      7.2.19. System recycling
      7.2.20. System of catching of steams of gasoline
      7.2.21. Neutralizer
      7.2.22. Three in one – or how to save the catalyst
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

7.2.9. The gauge of temperature of a cooling liquid (ECT-gauge)
THE GENERAL DATA

The arrangement eats-GAUGE on 4-cylinder engines


The arrangement eats-GAUGE on 6-cylinder engines



ЕСT-датчик Represents the thermoresistor which resistance raises at temperature fall.

Check

PERFORMANCE ORDER
1. For check disconnect from the gauge a socket and check up resistance of the gauge which should be 2500–3000 Ohm at 20 With.
2. Having warmed up the engine, or having removed the gauge and having placed in boiled water, check up resistance of the gauge at 80 With which should be 250–300 Ohm.

Replacement

PERFORMANCE ORDER
1. Switch off ignition.
2. On the cold engine merge 3–4 l of a liquid.
3. Turn out the gauge. At installation wrap up the new gauge a teflon tape and turn, observing extreme care.

The prevention

Breakage of the ECT-gauge because of maloperation will break normal work of all power supply system of the engine.