Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. An exhaust system
   - 7.2. Systems of decrease in toxicity of the fulfilled gases
      7.2.2. Technical characteristics
      7.2.3. OBD II-system
      7.2.4. II-system computer OBD (Powertrain Control Module)
      7.2.5. The gauge of turn throttle заслонки
      7.2.6. The gauge of absolute pressure in a soaking up collector
      7.2.7. The gauge of the mass expense of air
      7.2.8. The gauge of temperature of soaked up air (IAT-gauge)
      7.2.9. The gauge of temperature of a cooling liquid (ECT-gauge)
      7.2.10. The rotation gauge коленвала
      7.2.11. The gauge of rotation of a cam-shaft
      7.2.12. The contact gauge of pressure of the hydraulic booster
      7.2.13. The gauge of the maintenance of oxygen in the fulfilled gases
      7.2.14. The detonation gauge
      7.2.15. The gauge of speed of the car
      7.2.16. Перепускной the air valve of idling (IAC-valve)
      7.2.17. System of a choice of the channel всасывания (ACIS-system)
      7.2.18. Ventilation system картера
      7.2.19. System recycling
      7.2.20. System of catching of steams of gasoline
      7.2.21. Neutralizer
      7.2.22. Three in one – or how to save the catalyst
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4 Завод сварочные работы и еще.
Шлюхи Чкаловская еще здесь.
кованые мангалы мангалы из металла с крышей - фото и цены.

7.2.11. The gauge of rotation of a cam-shaft
THE GENERAL DATA

On 4-cylinder engines the gauge is mounted in a back part of a head of the block of cylinders, on engines V6 – in a forward part of a head of the block.

Check

PERFORMANCE ORDER
1. Disconnect a socket of conducting and check up resistance of the gauge (in drawing at the left – the 4-cylinder engine, on the right – 6-cylinder). Resistance should correspond specified in specifications (subsection 7.2.2 see.). On 4-cylinder engines the gauge for check should be removed.

Replacement

PERFORMANCE ORDER
1. Switch off ignition.
2. Disconnect a socket, turn away bolts and remove the gauge.