Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. An exhaust system
   - 7.2. Systems of decrease in toxicity of the fulfilled gases
      7.2.2. Technical characteristics
      7.2.3. OBD II-system
      7.2.4. II-system computer OBD (Powertrain Control Module)
      7.2.5. The gauge of turn throttle заслонки
      7.2.6. The gauge of absolute pressure in a soaking up collector
      7.2.7. The gauge of the mass expense of air
      7.2.8. The gauge of temperature of soaked up air (IAT-gauge)
      7.2.9. The gauge of temperature of a cooling liquid (ECT-gauge)
      7.2.10. The rotation gauge коленвала
      7.2.11. The gauge of rotation of a cam-shaft
      7.2.12. The contact gauge of pressure of the hydraulic booster
      7.2.13. The gauge of the maintenance of oxygen in the fulfilled gases
      7.2.14. The detonation gauge
      7.2.15. The gauge of speed of the car
      7.2.16. Перепускной the air valve of idling (IAC-valve)
      7.2.17. System of a choice of the channel всасывания (ACIS-system)
      7.2.18. Ventilation system картера
      7.2.19. System recycling
      7.2.20. System of catching of steams of gasoline
      7.2.21. Neutralizer
      7.2.22. Three in one – or how to save the catalyst
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4 1хбет зеркало подробности на сайте.
База отдыха новый свет официальный сайт на сайте pansionat-noviysvet.ru.
Ремонт эбу акпп тут.
творог вкусный день обезжиренный отзывы.

7.2.5. The gauge of turn throttle заслонки Check

PERFORMANCE ORDER
1. Disconnect a socket (the gauge is on a throttle branch pipe) and check up presence of pressure 5 In between conclusions 2 (–) and 1 (+) at the included ignition. Figures designate socket conclusions.
2. Attach a socket and check up pressure presence between conclusions 2 (–) and 3 (+) having connected probeы the voltmeter to a back part of conclusions. At the included ignition pressure should change from 0,5 In at closed to 4,5 In at completely opened заслонке. Otherwise the gauge replace.

Replacement

PERFORMANCE ORDER
1. Switch off ignition.
2. Disconnect a socket, turn away screws (are specified by arrows) and remove the gauge.