Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
- 4. Cooling system
   4.2. Technical characteristics
   4.3. The thermostat
   4.4. Cooling fans
   4.5. A radiator and a broad tank
   4.6. The water pump
   4.7. The gauge of temperature of a cooling liquid
   4.8. An electric chain of the motor of the delivery fan
   4.9. The electric motor of the delivery fan
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


4.8. An electric chain of the motor of the delivery fan

Arrangement of the delivery fan

And – the delivery fan

In – a socket of the motor of the fan

The delivery fan is located under a ware box.

Check of the resistor of the motor of the delivery fan

Resistor contacts
2 and 4
0,83 Ohm
2 and 3
1,12 Ohm
1 and 3
1,74 Ohm

Check of a gearshift of the delivery fan


1. If the delivery fan does not work, first of all, check up connections of sockets in a fan chain. Check up the fuse 2 on the panel of safety locks located under the instrument panel. Check up the relay of the delivery fan in panels of fuses and the relay, located under a cowl.
2. Define an arrangement of the relay of the fan. Remove the relay and check up, whether correctly it functions. If the relay is faulty, replace it.
3. Establish the gear change lever in parking position and put the car on a manual brake. Establish the ignition key in position ON, without getting the engine.
4. Check up, how the fan in all modes works.
5. If safety locks and the relay are in a normal state, and the fan does not work, test the fan.
Connect a tester to blue and red contacts. The tester should show at least 10 In – ignition is included, the switch of modes of the fan is in any position except position OFF (is switched off). If it not so, in a fan chain are malfunctions.
6. If pressure moves on the fan, and it does not work, connect by means of a crosspiece a black / white wire to grounding on a car body. If the fan still does not work, it is necessary to replace it. If the fan works, it means that in a chain of grounding of the fan there are malfunctions.
7. If the fan works, but not in all modes, check up the resistor of the fan which is located on a fan casing (it is specified by an arrow).
8. Remove the resistor and examine it on presence of damages. Check up the resistor by means of an ohmmeter. If necessary replace the resistor.
9. If the resistor functions normally, and the fan still works not in all modes, remove the control panel of a heater / of the air conditioner. Disconnect wires from a back part of a gearshift of the fan and check up resistance of the switch. If the switch is faulty, replace it.