Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
- 2. Maintenance service
2.2. The schedule of servicing Toyota Camry/Avalon
2.3. Primary and secondary checks
2.4. Check of level of oil and liquids
2.5. Check of a condition of tyres and pressure in tyres
2.6. Check of level of a liquid of system of hydrostrengthening of a steering
2.7. Check of level of liquid automatic gearbox
2.8. Replacement of engine oil and the oil filter
2.9. Survey and replacement of brushes of screen wipers
2.10. Check, servicing and accumulator gymnastics
2.11. Check, adjustment of a tension and replacement drive a belt
2.12. Check and replacement of hoses in an impellent compartment
2.13. Check of system of cooling
+ 2.14. Shift of wheels
2.15. Check of brake system
2.16. Replacement of the air filter
2.17. Power supply system check
2.18. Check of level of a liquid of differential (automatic gearbox)
2.19. Check of level of oil manual transmission
2.20. Steering and suspension bracket check
2.21. Check of covers of semiaxes
2.22. Check of final system
2.23. Height and a free wheeling of pedals of coupling and a brake
2.24. Replacement of the fuel filter
2.25. Replacement of a cooling liquid and washing of system of cooling
2.26. Check of the system, supervising allocation of steams of fuel
2.27. Replacement of liquid automatic gearbox
2.28. Replacement of oil manual transmission
2.29. Check of fastenings of a body
2.30. Check and replacement of spark plugs
2.31. Check and replacement of wires of spark plugs
2.32. Check and adjustment of backlashes of valves
2.33. Replacement of a lining of a cover of a jellied mouth of a fuel tank
2.34. Check and replacement of the valve of ventilation картера
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment
|
Following signs can testify to malfunction in brake system:
– The car pulls aside by pressing a brake pedal;
– The scratch of brakes is audible;
– Excessively free wheeling of a pedal of a brake;
– A pulsation of a pedal of a brake;
– Leak of a brake liquid, etc.
Disk brakes
| PERFORMANCE ORDER |
|
1. Check up a thickness of brake overlays through an aperture in a support (are specified by arrows). |
| 2. For exact check of a thickness of brake overlays and their condition remove supports of brakes and brake overlays. Clear overlays and check up a thickness and a condition of a frictional material. |
| 3. Measure a thickness of a brake disk by means of a micrometer. Examine a disk surface on presence of deep scratches or flutes. |
| 4. Check up all brake tubes and hoses on presence of damages or deterioration. Check up reliability of fastenings and connections. |
|
Back drum-type brakes
| PERFORMANCE ORDER |
|
1. To check up a thickness of a frictional material brake колодок, without removing a brake drum, remove rubber заглушку (it is specified by an arrow) and examine Pads. |
| 2. For more careful check turn off two fixing screws in the centre of a brake drum and remove a drum. |
| 3. Clear the mechanism of a brake by means of means for clearing of brakes. |
|
4. Measure a thickness of a frictional material brake колодок. If the material height over heads of rivets is less 1,5 mm, Pads it is necessary to replace. |
|
5. Check up a condition of springs of the mechanism of a brake. Examine the wheel cylinder on presence of traces of leak. Check up integrity of covers of the cylinder. Check up brake tubes and connections. |
| 6. Examine an internal surface of a brake drum on presence of cracks, deep scratches and wear tracks. |
|
The vacuum amplifier of brake system
| PERFORMANCE ORDER |
| 1. Squeeze out a pedal of a brake and start the engine – the pedal should fall a little. |
| 2. At the working engine squeeze out a brake pedal some times – the course of a pedal of a brake should not change. |
| 3. Squeeze out a brake pedal, muffle the engine and keep a pedal in the pressed condition within 30 seconds – the pedal should not fall. |
| 4. Start the engine, allow to it to work some minutes and muffle the engine. Squeeze out a brake pedal some times – the pedal course should decrease with each pressing. |
| 5. If the brake pedal behaved differently, the vacuum amplifier means is faulty, and it is necessary to replace it. |
|
Manual brake
| PERFORMANCE ORDER |
| 1. Count up number of the clicks necessary for reliable statement of the car on a manual brake. Adjust the mechanism of a manual brake if it is necessary. |
| 2. Check up, that the manual brake could keep the car on an abrupt slope. |
| 3. Squeeze out a brake pedal, muffle the engine and keep a pedal in the pressed condition within 30 seconds – the pedal should not fall. |
| 4. Start the engine, allow to it to work some minutes and muffle the engine. Squeeze out a brake pedal some times – the pedal course should decrease with each pressing. |
| 5. If the brake pedal behaved differently, the vacuum amplifier means is faulty, and it is necessary to replace it. |
|
|
|
