Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
- 9. A running gear
   + 9.1.2. Technical characteristics
   + 9.2. A steering
   - 9.3. Semiaxes
      9.3.2. Removal and installation of semiaxes
      9.3.3. Replacement of covers of a semiaxis
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

9.3.2. Removal and installation of semiaxes

Removal

Time fastening of a nave if necessary перекатывания the car at the removed semiaxes
1. A washer (external diameter of 50 mm)

2. A washer (external diameter of 18-25 mm)

3. Nut М14

4. Bolt М14

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Include a lay brake.
3. Remove a wheel cap (or naves), remove шплинт and a lock washer.
4. Release a nave nut.
5. Release wheel nuts, lift the car and remove a wheel.
6. Remove mud guards, turn away a nave nut.
7. Disconnect a spherical support from the lever (subsection 9.1.7 see.).
8. Loosen the полуось in a nave sharp blow through the brass prorate. If necessary remove a brake disk (subsection 10.6 see.) and a stripper displace полуось.
9. On a part of cars remove a plastic casing, having turned away bolts.
10. Get полуось from a nave.
11. At removal of the right semiaxis turn away a lock bolt of an intermediate support and remove a lock ring.
12. Get полуось from differential.
13. At removal of the left semiaxis get the internal hinge of a semiaxis from a check point.
14. If the car is necessary for rolling at the removed semiaxes fix a nave a bolt with a nut.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. Sharply push an internal part of a semiaxis that the lock ring of differential has come into a flute on the internal hinge.
3. A lock bolt of an intermediate support tighten with the set moment.
4. At first tighten nuts of wheels, then a nut of a nave with the set moment, establish a lock washer and зашплинтуйте.
5. Believe oil level in a check point.
6. At detection люфта or jammings of the bearing of an intermediate support replace a support (replacement is carried out in car-care centre).