Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
- 8. Transmission
   - 8.1.2. Care manual transmission
      8.1.3. Ropes of the lever of a gear change
      8.1.4. The block of the lever of a gear change
      8.1.5. The switch of lamps of lanterns of a backing
      8.1.6. Removal and installation manual transmission
   + 8.2. An automatic transmission
   + 8.3. Coupling
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4 Гайки (изготовление) ГОСТ на сайте http://www.metiz96.ru.

8.1.6. Removal and installation manual transmission

Removal
PERFORMANCE ORDER
1. Remove a cowl.
2. Lower pressure in fuel system.
3. Disconnect a wire of the minus plug of the accumulator.
4. If the car is equipped by cruise-control system, disconnect a wire from the block of the working mechanism of system and remove the block (bolts of the electronic block of system of the cruise-control are specified by arrows).
5. Remove the accumulator and an accumulator shelf.
6. Remove воздухозаборную a pipe of the air filter.
7. Uncover a jellied mouth of a fuel tank and disconnect the fuel tubes connecting the engine with a body.
8. Remove the fuel filter and a filter arm.
9. Remove a starter.
10. Disconnect a grounding wire (it is specified by an arrow) from a transmission.
11. Unscrew cylinder bolts (the left arrows) hydraulic drive of coupling from a transmission. Do not disconnect a tube from the cylinder. Unscrew bolts of capacity with a liquid of a hydraulic drive of coupling (the right arrows) and remove an arm of tubes.
12. Disconnect a rope of the throttle valve and a rope of system of the cruise-control from the lever mechanism of a throttle
13. Disconnect all hoses and wires.
14. Remove cooling fans. Merge cooling liquid, remove a radiator, remove all hoses of a cooling liquid and heating system hoses.
15. Disconnect gear change ropes.
16. Unscrew the top assembly bolts of a transmission.
17. Remove an arm of a final collector.
18. Loosen the bolts of forward wheels. Lift and fix the car on support. Remove forward wheels.
19. Disconnect exhaust pipes from final collectors and from каталитического the converter. Remove forward section of an exhaust pipe (it is specified by arrows).
20. Remove protective guards.
21. Merge engine oil.
22. Remove приводные belts.
23. Merge transmission oil.
24. Remove semiaxes.
25. Disconnect steering transfer with the amplifier from a suspension bracket.
26. Unscrew four bolts of an arm of the stabilizer of stability.
27. Tie up steering transfer to a body and unscrew bolts (are specified by arrows). Steering transfer should not disturb to transmission removal.
28. In six-cylinder engines unscrew bolts, fastening the shock-absorber to a transmission (are specified by arrows).
29. Unscrew bolts of a forward support of the engine.
30. Remove the left support of the engine and a support arm.
31. Disconnect a back support of the engine from a transmission.
32. Unscrew bolts of a cross-beam of a suspension bracket.
33. Establish a jack under a transmission.
34. Remove a rigidity edge in the left part of a transmission.
35. Unscrew arm bolts (), remove the right edge of rigidity () and a trailer disk () – the 4-cylinder engine.
36. Bolts of a trailer disk (are specified by arrows) – 6-cylinder engines.
37. Accurately lower a transmission.

Installation

Transmission installation is spent upside-down removals.