Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
- 9. A running gear
   + 9.1.2. Technical characteristics
   - 9.2. A steering
      9.2.2. A steering wheel
      9.2.3. Tips of steering draughts
      9.2.4. Covers of the steering mechanism
      9.2.5. The steering mechanism
      9.2.6. The hydraulic booster pump
      9.2.7. Removal of air from a contour of the hydraulic booster of a wheel
   + 9.3. Semiaxes
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

9.2.6. The hydraulic booster pump

THE GENERAL DATA

The pump of the hydraulic booster of a wheel (for cars with the 4-cylinder engine)

1. The right protective panel of a forward wing
2. An union bolt
3. A pressure head tube
4. A belt
5. A lining
6. A vacuum hose
7. The lopastnoj pump of the hydraulic booster
8. A hose of return of a liquid

The pump of the hydraulic booster of a wheel (for cars with the 6-cylinder engine)

1. The right protective panel of a forward wing
2. An union bolt
3. A lining
4. A pressure head tube
5. A belt
6. The lopastnoj pump of the hydraulic booster
7. A hose of return of a liquid

Removal

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Remove a liquid from a hydraulic booster tank, having sucked away a pear or a syringe.

3. Lift a forward part of the car and remove the right forward wheel.

4. Remove the protective panel of a forward wing.

5. Loosen the a collar also disconnect a hose from the hydraulic booster pump.

6. Turn away a bolt of the union and disconnect from the hydraulic booster a tube, copper уплотнители the union after dismantling of this connection are subject to replacement.

7. Release a bolt of an axis of turn of the pump and a bolt натяжителя a belt, remove a drive belt.

8. Remove an axial bolt and a bolt натяжителя a belt. Remove the pump.

Installation

PERFORMANCE ORDER

1. Installation is carried out upside-down. Adjust a belt tension.

2. Fill a tank with a liquid and remove air.