Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
- 9. A running gear
   + 9.1.2. Technical characteristics
   - 9.2. A steering
      9.2.2. A steering wheel
      9.2.3. Tips of steering draughts
      9.2.4. Covers of the steering mechanism
      9.2.5. The steering mechanism
      9.2.6. The hydraulic booster pump
      9.2.7. Removal of air from a contour of the hydraulic booster of a wheel
   + 9.3. Semiaxes
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

9.2.3. Tips of steering draughts
Removal

PERFORMANCE ORDER

1. Lift a forward part of the car and establish on supports. Remove forward wheels.

2. Keeping draught, release a counternut so that it was possible to designate tip position on a carving part of draught.

3. Turn away a nut and note position of an end face of a tip that a new tip to turn to this mark.

4. Расшплинтуйте also release a nut of steering draught.

5. Выпрессуйте the tip hinge, turn away a nut and get a tip.

6. Turn out a tip from steering draught.

Installation

PERFORMANCE ORDER

1. Screw a tip of draught to the put label. Insert the tip hinge into an eye on a rotary fist and tighten a counternut.

2. Tighten корончатую a nut and зашплинтуйте.

3. Establish a wheel and lower the car.

4. Check up and if necessary adjust corners of installation of wheels.