Toyota Camry

1996-2001 of release

Repair and car operation

Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
- 9. A running gear
   - 9.1.2. Technical characteristics
      9.1.3. The stabilizer of cross-section stability of a forward suspension bracket
      9.1.4. A rack of a forward suspension bracket
      9.1.5. A rack and a suspension bracket spring
      9.1.6. The suspension bracket lever
      9.1.7. Spherical support
      9.1.8. A rotary fist and a nave
      9.1.9. A nave and the bearing of a forward wheel
      9.1.10. The stabilizer and plugs of the stabilizer of a back suspension bracket
      9.1.11. A rack of a back suspension bracket
      9.1.12. A longitudinal bar
      9.1.13. Levers of a back suspension bracket
      9.1.14. A nave and the bearing of a back wheel
      9.1.15. An arm of a back suspension bracket
      9.1.16. Corners of installation of wheels
   + 9.2. A steering
   + 9.3. Semiaxes
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

9.1.11. A rack of a back suspension bracket
Removal

PERFORMANCE ORDER

1. Remove a back seat and facing of a ware tray.

2. Lift a back part of the car and establish on supports. Remove a wheel.

3. On the cars equipped with ABS-system, remove from the shock-absorber a flexible hose and the gauge of speed.

4. Disconnect from a rack a brake hose. On the cars equipped with ABS-system disconnect wires from the wheel gauge of speed.

5. Disconnect draught of the stabilizer from a rack.

6. Substitute a jack under an arm of a back axis.

7. Release nuts of bolts of fastening of a rack to an arm of a suspension bracket (arrow) and beat out bolts. It is possible to beat out bolts only after removal of nuts and поддомкрачивания a suspension bracket arm. Keep in mind that a rack heavy enough and work it is necessary to carry out together, the assistant should support a rack if necessary.

8. Turn away three nuts of the top fastening of a rack to a body.

9. Lower a jack an arm of a suspension bracket and remove two bolts of fastening of a rack to an arm.

10. Remove a rack.

Check

PERFORMANCE ORDER

Execute procedures from section 3. In need of dismantling for the purpose of spring or rack replacement, execute procedures from section 4.

Installation

PERFORMANCE ORDER

1. Working together, establish a rack in a wheel niche so that hairpins of the top fastening have entered into apertures and screw nuts.

2. Get an arm in a rack flange, insert bolts and screw nuts. Tighten nuts with the set moment.

3. Attach draught of the stabilizer for a rack arm.

4. Attach to a rack a brake hose. On the cars equipped with ABS-system, attach wires to the gauge of speed.

5. Establish a wheel and lower the car.

6. Tighten three nuts of the top fastening of a rack with the set moment.

7. Establish a back seat and facing of a ware tray.