| 1. Release nuts of a back wheel, lift a back part of the car and remove a wheel. |
| 2. Remove теплоизолирующий a guard of an exhaust pipe. |
|
3. Disconnect from a bar of the stabilizer of draught, having turned away a nut. At проворачивании hairpins fix it шестигранным a key. |
|
4. Turn away bolts of fastening of collars of plugs of the stabilizer. |
| 5. Remove a stabilizer bar. Remove collars with rubber plugs. |
| 6. Check up a condition of plugs If on plugs damages (cracks, rubber hardening, strong deformations) replace plugs are found out. Check up a condition of hinges of draughts of the stabilizer (subsection 9.1.3 see.). |
| 7. Clear a place прилегания plugs on a bar of a dirt and a rust. Establish all details upside-down. If necessary grease new plugs and collars with culinary vegetable oil. It is forbidden to oil plugs at assemblage on an oil basis or a brake liquid in order to avoid a premature exit of plugs out of operation. |
