Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
- 8. Transmission
   + 8.1.2. Care manual transmission
   - 8.2. An automatic transmission
      8.2.2. Technical characteristics
      8.2.3. Care automatic gearbox
      8.2.4. The general diagnostics
      8.2.5. A rope of the lever of a gear change
      8.2.6. A rope throttle заслонки
      8.2.7. The switch of blocking of ignition
      8.2.8. System of blocking of the lever of a gear change
      8.2.9. Replacement of epiploons
      8.2.10. Removal and installation automatic gearbox
      8.2.11. An electronic control system
      8.2.12. "Automatic machine"
   + 8.3. Coupling
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

8.2.9. Replacement of epiploons

LEADING SEMIAXES
PERFORMANCE ORDER
1. Remove semiaxes.
2. Take old epiploons by means of mount or the special tool.
3. Establish new epiploons.

CONDENSING RING OF THE CONDUCTED MECHANISM OF THE SPEEDOMETER

The gauge of speed of the car and casing of the conducted mechanism of a speedometer are located in a back part of a transmission.

PERFORMANCE ORDER
1. Disconnect a wire from the gauge of speed, unscrew fixing bolts (are specified by arrows), remove the gauge and the conducted mechanism.
2. Remove condensing ring.
3. Establish a new ring and establish the mechanism and the gauge on the places.

CONDENSING RING OF THE GAUGE OF SPEED СЦЕПЛНИЯ (6-CYLINDER ENGINES)

The gauge of speed of coupling is located on a transmission casing.

PERFORMANCE ORDER
1. Disconnect a wire from the gauge and remove the gauge.
2. Remove an old condensing ring, establish a new ring and establish the gauge into place.