Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
- 8. Transmission
   + 8.1.2. Care manual transmission
   - 8.2. An automatic transmission
      8.2.2. Technical characteristics
      8.2.3. Care automatic gearbox
      8.2.4. The general diagnostics
      8.2.5. A rope of the lever of a gear change
      8.2.6. A rope throttle заслонки
      8.2.7. The switch of blocking of ignition
      8.2.8. System of blocking of the lever of a gear change
      8.2.9. Replacement of epiploons
      8.2.10. Removal and installation automatic gearbox
      8.2.11. An electronic control system
      8.2.12. "Automatic machine"
   + 8.3. Coupling
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

8.2.7. The switch of blocking of ignition
THE GENERAL DATA

The blocking switch does not allow to get the engine if any transfer, except parking and neutral is included.

Switch check (4-cylinder models)
Position of the lever of the switch of transfers
Numbers of contacts, the chain between contacts is closed
P
4 – 7
5 – 6
R
4 – 8
N
4 – 10
5 – 6
D
4 – 9
2
2 – 4
L
2 – 3

Switch check (6-cylinder models)

Position of the lever of the switch of transfers
Numbers of contacts, the chain between contacts is closed
P
2 – 7
5 – 6
R
2 – 8
N
2 – 9
5 – 6
D
2 – 10
2
2 – 3
L
2 – 4

Switch adjustment (4-cylinder models)

1. An adjusting line

2. A cut

Switch adjustment (6-cylinder models)
1. An adjusting line

2. A bolt

3. A cut

4. A bolt

Check

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Disconnect a wire from the switch.
3. Check up by means of an ohmmeter as the switch in all positions (see fig. Check of the switch of 4-cylinder models and fig. Check of the switch of 6-cylinder models) works.
4. If necessary replace the switch.

Replacement

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Disconnect a wire from the switch.
3. Braid a nut of the switching lever on a transmission (the left arrow), remove the lever and unscrew switch bolts.
4. Remove the switch.
5. Installation is spent upside-down removals.

Adjustment

PERFORMANCE ORDER
Loosen the bolts of the switch also turn it so that to combine a cut and an adjusting line (fig. Adjustment of the switch of 4-cylinder models and fig. Adjustment of the switch of 6-cylinder models see). Tighten switch bolts.