Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
- 2. Maintenance service
   2.2. The schedule of servicing Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tyres and pressure in tyres
   2.6. Check of level of a liquid of system of hydrostrengthening of a steering
   2.7. Check of level of liquid automatic gearbox
   2.8. Replacement of engine oil and the oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and accumulator gymnastics
   2.11. Check, adjustment of a tension and replacement drive a belt
   2.12. Check and replacement of hoses in an impellent compartment
   2.13. Check of system of cooling
   + 2.14. Shift of wheels
   2.15. Check of brake system
   2.16. Replacement of the air filter
   2.17. Power supply system check
   2.18. Check of level of a liquid of differential (automatic gearbox)
   2.19. Check of level of oil manual transmission
   2.20. Steering and suspension bracket check
   2.21. Check of covers of semiaxes
   2.22. Check of final system
   2.23. Height and a free wheeling of pedals of coupling and a brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of a cooling liquid and washing of system of cooling
   2.26. Check of the system, supervising allocation of steams of fuel
   2.27. Replacement of liquid automatic gearbox
   2.28. Replacement of oil manual transmission
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of backlashes of valves
   2.33. Replacement of a lining of a cover of a jellied mouth of a fuel tank
   2.34. Check and replacement of the valve of ventilation картера
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


75acfaa4

2.4. Check of level of oil and liquids
THE GENERAL DATA

Engine oil

Arrangement probeа for check of level of oil
Щуп for check of level of oil (it is specified by an arrow) it is located on the right back party of the engine. Oil level is necessary for checking before a trip on the car or in 15 minutes after engine deenergizing.

Щуп for check of level of oil

 

Get probe and wipe the end probeа. Insert probe up to the end into a tube and again get it. Oil level should be between two lines on probeе. The difference in number of oil between marks on probeе makes about 1 litre.

Bulk mouth

To add oil braid the cap of a bulk mouth located on a cover of a head of cylinders, insert into a mouth a funnel (it is specified by an arrow) and fill in oil.

Cooling liquid

Regularly check level of a cooling liquid in a tank with the help probeа or marks in a tank wall. When the engine is heated-up, liquid level should raise to the top mark. Add cooling liquid if it is necessary.

Tank for a cooling liquid
Check up, that level of a cooling liquid was between marks Full and Low. If necessary add the necessary quantity of antifreeze and water.

At check of level of a cooling liquid also check a condition of the liquid. If the liquid has got brown or rusty colour, it it is necessary to replace and wash out cooling system.

Washing liquid

Tank for a liquid of washers

The tank for a liquid of washers of a windshield is located in the right forward corner of an impellent compartment. Check up, that liquid level was near the top mark in a jellied mouth.

In a warm climate fill in a tank only on two third, and in a frigid climate, use a solution of a special nonfreezing liquid. Do not use antifreeze as it can damage a car paint.

Liquid of a hydraulic drive of brakes and coupling

Check up, that liquid level was between marks the MOVE and MIN, located on a tank wall. Add a liquid of demanded type if it is necessary.

Check up a condition of the liquid if at it there are parts of a dirt or a water droplet, a liquid it is necessary to merge and fill system with a new liquid.