Toyota Camry

1996-2001 of release

Repair and car operation



Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
- 11. A body
   11.2. Vinyl furnish
   11.3. An upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. A windscreen and motionless glasses
   11.8. The central lock
   11.9. A cowl
   11.10. The lock of a cowl and a cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. A forward wing
   11.13. A luggage carrier cover
   11.14. A latch and the lock of a cover of a luggage carrier
   11.15. A cable of a drive of unlocking of a door of a fuel tank / of a cover of a luggage carrier
   11.16. Facing panels of doors
   11.17. A door
   11.18. A latch, the lock of a door and the handle
   11.19. Door glass
   11.20. Стеклоподъемник
   11.21. Mirrors
   11.22. The central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. The panel of devices
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. A ware tray
+ 12. An electric equipment


muktilist의 토토사이트 먹튀검증 된 내용 확인하기
75acfaa4

11.27. Seats

FORWARD SEAT


The prevention

The part of cars is completed with seat belts with пиросистемой the preliminary tension, working at failure. On these cars it is forbidden to dismantle seat belts and to disconnect any sockets about belts. About malfunction of such system specifies fire of an emergency lamp of a pillow of safety. In this case immediately it is necessary to hand over the car in car-care centre.


On cars with lateral pillows of safety before removal of seats deactivate the safety module (subsection 12.1.26 see.).

PERFORMANCE ORDER
1. Remove overlays and turn away bolts of fastening of a seat.
2. Turn away bolts of fastening of a seat (all it is specified 3 of 4 bolts).
3. Cast away a seat forward, disconnect sockets and remove a seat.
4. Installation is carried out upside-down.

BACK SEAT

PERFORMANCE ORDER
1. Raise a seat pillow, turn away a bolt and remove a pillow, having deduced seat belts from grooves in a back part of a seat.
2. On models Camry and Solara submit each back upwards, having deduced it from locks and cast away forward. Turn away bolts. On models Avalon remove a pillow and turn away 4 bolts (arrow).
3. Installation is carried out upside-down.