Toyota Camry

1996-2001 of release

Repair and car operation


Toyota Camry
+ 1. The maintenance instruction
+ 1.2. The information before car driving
+ 1.3. Independent maintenance service
+ 1.4. Technical characteristics
+ 1.5. Some councils at car purchase
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmission
+ 9. A running gear
+ 10. Brake system
- 11. A body
   11.2. Vinyl furnish
   11.3. An upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. A windscreen and motionless glasses
   11.8. The central lock
   11.9. A cowl
   11.10. The lock of a cowl and a cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. A forward wing
   11.13. A luggage carrier cover
   11.14. A latch and the lock of a cover of a luggage carrier
   11.15. A cable of a drive of unlocking of a door of a fuel tank / of a cover of a luggage carrier
   11.16. Facing panels of doors
   11.17. A door
   11.18. A latch, the lock of a door and the handle
   11.19. Door glass
   11.20. Стеклоподъемник
   11.21. Mirrors
   11.22. The central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. The panel of devices
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. A ware tray
+ 12. An electric equipment


75acfaa4

11.20. Стеклоподъемник

СТЕКЛОПОДЪЕМНИК THE FORWARD DOOR

PERFORMANCE ORDER
1. Remove facing of a door and a water filter (subsection 11.16 see.).
2. Remove glass.
3. On cars with the electric drive window lifterа disconnect an electric motor socket.
4. On models Avalon or Solara turn away bolts and nuts of fastening of the electric motor and window lifterа.
5. On models Camry (window lifter type "scissors") designate position of a back bolt on the top directing. Turn away bolts on bottom directing, then six screws of fastening window lifterа and the electric motor (or a manual drive window lifterа).
6. Remove window lifter, having got it through an aperture in a door skeleton.
7. Installation is carried out upside-down. Before installation grease rubbing parts window lifterа (arrows specify greasing points).

СТЕКЛОПОДЪЕМНИК THE BACK DOOR

PERFORMANCE ORDER
1. Remove facing of a door and a water filter (subsection 11.16 see.).
2. Remove glass.
3. On cars with the electric drive window lifterа disconnect an electric motor socket.
4. Turn away bolts of fastening of the electric motor and window lifterа. On all considered cars fastening of a drive of glass of a back door same, as on a lobby.
5. Remove window lifter, having got it through an aperture in a door skeleton.
6. Installation is carried out upside-down. Before installation grease rubbing parts window lifterа.